CryptoRF
Design
5
8667A–Crypto–5/09
This evaluation board/kit is intended for use for
FURTHER ENGINEERING,
DEVELOPMENT, DEMONSTRATION, OR EVAL PURPOSE ONLY.
It is not a finished
product and may not (yet) comply with some or any technical or legal requirements that
are applicable to finished products, including, without limitations, directives regarding
electromagnetic regarding electromagnetic compatibility, recycling (WEEE), FCC, CE or
UL (except as may be otherwise noted on the board/kit). Atmel supplied this board/kit “AS
IS,” without any warranties, with all faults, at the buyer’s and further users’ sole risk. The
user assumes all responsibly and liability for proper and safe handling of goods. Further,
the user indemnifies Atmel from claims arising from the handling or use of goods. Due to
open construction of the product, it is the user’s responsibility to take any and all
appropriate precautions with regard to electrostatic discharge and any other technical or
legal concerns.
EXCEPT TO THE EXTENT OF INDEMNITY SET FORTH ABOVE, NEITHER USER NOR
ATMEL SAHLL BE LIABLE TO EACH OTHER FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
No license is granted under any patent right or other intellectual property right of Atmel covering or
relating to any machine, process, or combination in which such Atmel product or services might be
or are used.
Mailing Address: Atmel Corporation, 2325 Orchard Parkway, San Jose, Ca 95131
