9
Method B: Assign input X to be displayed on output Y
1. Press
first then use
or
to select the input channel "X".
2. Once you see the LED displays the desired input channel "X" then press
and then use
or
to select the output channel "Y".
3. Once you reach the desire input & output channel setting, wait for 2 seconds and it'll be done.
Method C: Use hot keys to assign input X to be displayed on all 5 outputs
1. Press
if you want to have input channel 1 to be shown on all 5 outputs.
2. Press
you want to have input channel 1 to be shown on all 5 outputs.
3. Press
you want to have input channel 1 to be shown on all 5 outputs.
4. Press
you want to have input channel 1 to be shown on all 5 outputs.
5. Press
you want to have input channel 1 to be shown on all 5 outputs.
Method D: Use hot keys to assign input X to be displayed on output X
1. Press
then you can get the same default channel mapping in software control, as you can
see the mapping table below.
Source Channel
Î
Display Channel
Input 1
Î
Output 1
Input 2
Î
Output 2
Input 3
Î
Output 3
Input 4
Î
Output 4
Input 5
Î
Output 5
