Atlona AT-VCC-RS232-KIT Скачать руководство пользователя страница 4

Страница: 4 / 8

Installation Guide

AT-VCC-RS232-KIT

Installation and Set Up

Connect the Relay connector into the 3.5mm port on the unit.

Connect the Ethernet connector into the front port of the VCC.
a

If the Ethernet cable is connected to a non PoE switch, use a PoE injector (purchased

separately) or a mini USB to USB cable to a USB port on a wall port or device that

supports USB power.

Open any browser on the network and type in the IP address of Velocity.

Select the

button from the top left corner and select

Sites

5. Select the building that corresponds with the room of the VCC.
6

Select the room the VCC is located in. A new screen will take over the window and display

the technology in the room.

Select the + button located at the top right corner of the room. A new menu will open.

NOTE:

Installation of the Velocity Command Converter can only be done after the

VGW-250 has been set up. View the AT-VGW-250 Installation Guide and Velocity

Manual for instructions.

Содержание AT-VCC-RS232-KIT

Страница 2: ...e same network as the Velocity Gateway 2 USB Not used at this time 3 3 5mm Port Connect to a VCC RS 232 3 5mm connector 4 RS 232 Connector Connect the RS 232 connector into the RS 232 port of the controlled device 5 3 5mm Connector Connect the 3 5mm connector to the 3 5mm port of the VCC Panel Description ...

Страница 5: ...2 KIT 5 10 Select VCC Serial from the drop down menu A new screen will open 8 Press the scan network button All Atlona devices found will appear in the unassigned list 9 Select the Add button next to the VCC A new pop up will appear ...

Страница 8: ...of Atlona Inc All other brand names and trademarks or registered trademarks are the property of their respective owners Pricing specifications and availability subject to change without notice Actual products product images and online product images may vary from images shown here Version 1 atlona com 408 962 0515 877 536 3976 ...