Atlona AT-UHD-SW-51, Руководство пользователя

Страница: 13 / 19

13
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Each command or feedback is terminated with a carriage return.
Note:
If the command fails or is incorrect the feedback is “Command FAILED”
Note:
Preferred timings include audio EDIDs as well. 2Ch is two channel audio, MCh is multi-channel audio
(including up to Dolby TrueHD or DTS-HD Master Audio), DD is Dolby Digital, and DVI does not
include audio.
Commands
The command codes are case sensitive, do not change capitalization, spacing, or lettering.
Command Feedback Description
PWON PWON Turns switcher on
PWOFF PWOFF Turns switcher off
PWSTA PWSTA Displays power status
VersionX
Ex. Version OSD VersionX
Ex. Version x.x.xx Displays the software versions: ex. VersionMCU
firmware [MCU]
OSD menu [OSD]
DSP [DSP]
FPGA [FPGA]
Type AT-UHD-SW-51 Displays the model information
Mreset Mreset Reset device to manufacture default
Lock Lock Locks the front panel buttons
Unlock Unlock Unlocks the front panel buttons
x2AVx1 x2AVx1 Switch inputs Ex. Switch to input 4= x4AVx1
Status x2AVx1 Displays what input is connected to the output
x1$ X x1$ on Turns on/off output channel (X= on, off, sta)
AutoSW X AutoSW on Turns auto switching on/off (X= on, off, sta)
IRON IRON Turns on the IR receiver window
IROFF IROFF Turns off the IR receiver window
EDIDCopy1 memY
Ex. EDIDCopy1 mem2 EDIDCopy1 memY
Ex. EDIDCopy1 mem2 Save the EDID of output 1 to memory (Y= 1-8)
EDIDMSetX default EDIDMSetX default Set the EDID of the input to the default EDID
EDIDMSetX saveY EDIDMSetX saveY Set the EDID of an input to the previously saved EDID memory
Ex. EDIDMset3 save1 - sets input 3 to EDID memory 1
EDIDMSetX intY EDIDMSetX intY Sets the EDID of an input to one of the internal EDIDs
Ex. EDIDMSet2 int3 - Sets input 3 to internal EDID 3
HDCPSet1 X
Ex. HDCPSet1 on HDCPSet1 X
Ex. HDCPSet1 on Set HDCP reporting mode of the HDMI input (X= 1-5)(Y= on, off, sta)
Ex. Input 3 to report HDCP non-compliant = HDCPSet3 off
AudioOut1 X AudioOut1 on Turns the HDMI audio output on/off (X= on, off, sta)
ARC X ARC on Turns on/off ARC (X= on, off, sta)
[Y] preferred timing -
STD
Sink (pass-through) 1 1080P 2Ch 2 1080P MCh
3 1080P DD 4 1080P 3D 2Ch 5 1080P 3D MCh
6
1080P 3D DD
7
720P 2CH
8
720P DD
9 1280x800 2Ch 10 1366x768 2Ch 11 1080P DVI
12
1280x800 DVI
13
3840x2160 2Ch
14
3840x2160 MCh