AT-UHD-HDVS-300-KIT
39
The Web GUI
Setup page
Power
Click this drop-down list and select the protocol used to send the power command.
Volume/Mute
Click this drop-down list and select the protocol used to send volume and mute commands.
Retry Timeout
Enter the time interval before the command is resent, if a failure should occur.
Lock Power Button
Allows the
POWER
button on the front panel to be locked, preventing accidental operation when the product is in
use. Click this check box to enable this feature.
Setting
Description
Command None, AV On/Off
Display is always ON, but the source can be powered-on or powered-off.
Command On/Off, AV On/Off
Both the source and display can be powered-on or powered-off.
Command On/Off, AV No Change
Display can be powered-on or powered-off, but the source is always on.
Display Switch Mode
Click this drop-down list to set the display switching mode.
Note that Display Switch Mode can only be configured if
RS-232 Control
is set to
Control
. Refer to the
for more information. If
RS-232 Control
is set to
Pass-Thru
, when assigning the Display Switch
Mode, then an error message will be displayed.