18
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Audio output 1 configuration
Source - Select between
A
udio
F
ollow
V
ideo
(HDMI/HDBaseT OUT 1)
,
A
udio
F
ollow
O
ther
V
ideo
(HDMI/HDBaseT OUT 2)
, Aux 1
(MIC/Line IN 1)
, Aux 2
(Mic/Line IN 2)
Ducking - Enable - Ducking automatically changes the source
(AFV/AFOV)
volume
Disable - Mixing enabled
Attack time - Sets delay before the ducking begins after detecting signal from a microphone
Release time - Sets delay time after no signal is detected that ducking stops
Program decrease - Set amount to ensure the program level is low enough so when ducking is
triggered the speaker/audio is heard
Down mix - Enable/disable - Sets AUX source to mix output mono
(enabled)
or two channel
(disabled)
Mixer - Mix analog audio sources with program audio
Lipsync - Adjust lipsync to compensate for multiple scalers after the CLSO-824 which may delay
video without delaying audio. It is not intended to compensate for errors in source
material
Audio output 2 configuration follows the same configuration as output 1 except for in source
Source -
A
udio
F
ollow
V
ideo
(HDMI/HDBaseT OUT 2)
,
A
udio
F
ollow
O
ther
V
ideo
(HDMI/HDBaseT OUT 1)
,
Aux 1
(MIC/Line IN 1)
, Aux 2
(Mic/Line IN 2)
