14
The right area is for device controlling. Click these buttons to control the device. It is the
same as using the remote controller. The left area shows which inputs are being chosen by
the outputs.
3) When ‘Assign IP’ is displayed, it means that the device has not been assigned an IP au
-
tomatically. Double click this item, or click right button and click ‘Assign IP’ on the pull down
menu. You can assign the IP address in the Assign IP dialog.
Click OK after assigning the new IP and to return to the previous dialog.
Click
and
. The device can be displayed correctly.
ATTENTION:Here, assign IP is different from Set-IP in COMCTL. Set-IP in COMCTL to
save the IP address in flash. When the unit is powered on, it will read the IP from flash
and set it as static IP. Assign IP the function when automatically obtained IP address
fails. This assigned IP address is not saved in flash.
15
