8
Mode button
Click this button to set the switch mode: Quick switch
or Normal switch. When you click this button it will read
the current mode of AT-PROHD88M-SR; if you want
to change the mode, select the mode you want and
click OK.
Set IP button
Click this button to set IP address for NETCTL.
6.2.3. The Com Status
Connect state
Connect state shows whether the com is open or not. If it is open, the state is green.
Otherwise, the state is red.
Com select
Select which com you will use.
Connect button
The word on this button will change when the connection state changes. If the word is
“Disconnect”, then click this button; the com will be closed. If the word is “Connect”, then
click this button; the com will be opened.
