AT-HDVS-200-RX
44
IPDHCP
Enables / disables DHCP mode on the AT-HDVS-200-RX. on = enables DHCP mode; off = disables DHCP mode;
sta = displays the current IPDHCP setting. If this feature is disabled, then a static IP address must be specified for
the AT-HDVS-200-RX. Refer to the
command for more information.
Example
IPDHCP on
Syntax
IPDHCP X
Parameter
Description
Range
X
Value
on, off, sta
Feedback
IPDHCP on
Commands
IPLogin
Enables / disables the use of login credentials when starting a Telnet session on the AT-HDVS-200-RX. If this feature
is set to on, then the AT-HDVS-200-RX will prompt for both the username and password. Use the same credentials
as the web GUI.
on
= login credentials required;
off
= no login required;
sta
= displays the current IPLogin setting.
Example
IPLogin off
Syntax
IPLogin X
Parameter
Description
Range
X
Value
on, off, sta
Feedback
IPLogin off
IPPort
Sets the Telnet listening port for the AT-HDVS-200-RX. Use the
sta
argument to display the current port setting.
Example
IPPort 23
Syntax
IPPort X
Parameter
Description
Range
X
Port
0 ... 65535, sta
Feedback
IPPort 23
