AT-HDVS-150-TX / AT-HDVS-150-TX-PSK
12
When the unit is connected to a compatible receiver and display, pressing the
DISPLAY ON/OFF
button will send a
toggle or trigger command to set the display power state. This is a programmable button and requires a compatible
Atlona receiver.
1. Press the
DISPLAY ON/OFF
button.
2. The power state of the display, which is connected to the receiver, will be toggled.
Press the
INPUT SELECT
button to cycle through each of the available inputs on the unit. The unit will always retain
the last selected input when the unit is powered-off.
1.
Below, the
HDMI 1
LED indicator is bright green, indicating that
HDMI 1
is the active input.
2. Press the
INPUT SELECT
button, to select HDMI 2. The
HDMI 2
LED indicator will turn bright green.
3. Press the
INPUT SELECT
button a third time, to select the
VGA IN
port. The
VGA
LED indicator will turn bright
green.
4. Press the
INPUT SELECT
button again to return to
HDMI 1
.
Basic Operation
Powering the Display
Selecting the Input
