AT-ETU-SYNC
14
1.
Power the AT-ETU-SYNC.
2.
Position the AT-ETU-SYNC between the source and sink. The actual position of the AT-ETU-SYNC will depend
upon the setup. In the illustration, below, an intermediate device (such as a switcher, splitter, or matrix) has been
introduced. If no intermediate devices are present, then connect the AT-ETU-SYNC between the source and the
display (sink).
•
Problem is suspected between the sink and any upstream devices:
a.
Connect an HDMI cable from the intermediate device to the
HDMI IN
port on the AT-ETU-SYNC.
b. Connect an HDMI cable from the
HDMI OUT
port on the AT-ETU-SYNC to the display (sink).
•
If the problem is suspected between the source and the intermediate device(s):
a.
Connect an HDMI cable from the source to the
HDMI IN
port on the AT-ETU-SYNC.
b. Connect an HDMI cable from the
HDMI OUT
port on the AT-ETU-SYNC to the intermediate device.
Video
Video
Display (Sink)
AT-ETU-SYNC
Source
OR
AT-ETU-SYNC
Intermediate
Device
The AT-ETU-SYNC features a
TEST
button which tests the source, sink, or the entire system to aid in troubleshooting
connectivity issues.
Performing System Tests
In-Line
Testing
3.
Press and release the
TEST
button on the front panel of the AT-ETU-SYNC.
Basic Operation
