AT-ETU-SYNC
12
The AT-ETU-SYNC has the ability to learn the EDID from another device, using EDID mode 0. Once learned, the
EDID data will be read by the source, providing all the necessary details of the type of signal that will be sent to the
sink device.
1. Disconnect the AT-ETU-SYNC from the system.
2.
Power the AT-ETU-SYNC.
3. Rotate the
EDID
dial to EDID mode 0, as shown.
4.
Connect an HDMI cable from the sink device to the
HDMI OUT
port on the AT-ETU-SYNC. Make sure that the
sink device is powered-on.
5.
Press and hold the
LEARN
button on the AT-ETU-SYNC until the
HPD
light glows green.
6.
Release the
LEARN
button.
Learning an EDID
EDID mode 0
Display (Sink)
AT-ETU-SYNC
Basic Operation
