6
Assembly and Use (cont’d)
Step 7:
To open umbrella, pull out Lever Clamp to release Glide Handle. Grasp and
slide Glide Handle up along Umbrella Pole. Turn Crank Handle to right until Lower
Center Hub reaches end of Support Pole (shown above) and canopy has proper
tension. Push Lever Clamp down to lock Glide Handle in place at desired angle.
Step 8:
To close umbrella, pull out Lever Clamp and slide Glide Handle down
Umbrella Pole. Turn Crank Handle to left until the canopy is fully closed. Secure with
straps.
Step 9:
To rotate canopy 360 degrees, loosen control knobs on Holder Pole and turn
umbrella to desired postion. Re-tighten control knobs to secure.
Control
knob
Rotate
Lever clamp
Glide handle
Crank handle