L
5
Assembly and Use (cont’d)
Step 5:
Pull holder pole ring from top of Holder Pole (F) and unscrew both control
knobs. Slide Pole Support Cup (L) onto Holder Pole (F). Replace control knobs and
holder pole ring.
Step 6:
Insert Umbrella Frame (N) into Holder Pole (F) and tighten control knobs to
secure the umbrella in place. Fixed stop pin on frame will rest on holder pole ring.
Unfasten storage staps before use.
WARNING:
Fully assemble umbrella base prior to inserting frame to avoid
umbrella tipping. Failure to assemble and install as instructed could result in
the umbrella tipping over, causing personal injury and/or property damage.
Storage Straps
Holder Pole Ring
Control Knobs
N
Storage Straps