Atleisure 1902469, Инструкция по сборке, уходу и использованию

Страница: 3 / 27

3
E
Part Description Quantity
A Blow Molded Base Outside 2
B Blow Molded Base Inside 2
C Lower Cross Leg 1
CAN Canopy (on the umbrella frame) 1
D Upper Cross Leg 1
E 360 1
E2 Canopy Crank Handle 1
L Pole Support Cap 1
E3 Canopy Glide Handle 1
M Blow Molded Base Cap 4
N Umbrella Frame (with canopy) 1
Package Contents
Picture Description Quantity
Adjustable Wrench 1
Tools Required for Assembly (not included)
Hardware Contents
Part Picture Description Quantity
GG
Outer Hex Bolt M10-1.5x20A2-70
4
HH
Flat Washer M10A2-70
4
Assembly Instructions
An additional person is suggested to assist with inserting the umbrella frame
into the pole holde
r.
Crank Handle
CAUTION:
CAUTION:
Do not use sharp tools or equipment such as a knife or scissors when removing
the protective material; it may damage the product. Be careful not to throw away small parts
such as bolts, washers, etc. that may be wrapped in the protective materials.