Atlas WBT-210, Быстрый старт

Страница: 11 / 17

11
STEP 17: When the cycle is finished, the display will read “ Add 3.50 ” (100 grams) .
Remove the calibration weight from the inside edge of the wheel.
Rotate the wheel until all the outside weight indicators are fully lighted.
Apply the
3.5 ounce (100 gram) calibration weight to the outside edge of the wheel
at the 12 o’ clock position. Lower the hood and spin the wheel.
STEP 18: After the cycle is finished, the screen will flash “EEP ON” then return to “000 000” .
Your balancer is now calibrated. To check the calibration, rotate the wheel so that the
weight is positioned at 6 o’clock. All of the weight indicators should be fully lighted
as shown below.