Atlas TC289, Руководство по установке и эксплуатации

Страница: 23 / 32

REV. 01
19 / 27
Never keep your hands onto the wheel: the arm recovery to “working position”
could set the operator at risk of hand crushing between rim and mounting head.
x
Move the tire so that the bead passes below the front section of the mounting head and is
brought up against the edge of the rear section of the mounting head itself.
x
Keeping the tire bead pressed down into the wheel rim channel with your hands, press down on
the pedal (Z) to rotate the turntable clockwise. Continue until you have covered the entire
circumference of the wheel rim (Fig. 12).
To prevent industrial accidents, keep hands and other parts of the body as far as
possible from the tool arm when the table top is turning.
x
Insert the inner tube if there is one and repeat the same operations to mount the upper side of
the tire.
Demounting and mounting are always done with the clockwise turntable
rotation. Anticlockwise rotation is used only to correct operator’s errors or if
the turntable stalls.