manualshive.com logo in svg

Atlas RIV939P, Руководство по эксплуатации

Поделиться
Скачать
Atlas RIV939P Скачать руководство пользователя страница 50

50      PennEngineering • www.pemnet.com

Instruction Manual - RIV939P

7 - SERVICING THE TOOL

7.1 - MAINTENANCE STATUS

Maintenance operations must be carried out with the tool stopped and disconnected from the pneumatic supply line.

Warnings:

 

• The tool maintenance instructions must be carefully followed.

 

• To ensure safety and perfect tool efficiency, we recommend using ORIGINAL spare parts.

7.2 - CLEANING

Completely clean and grease the tool on a periodic basis (depending on the type and frequency of use). At minimum, carry out 

cleaning operations at least once a year.

7.3 - ORDINARY MAINTENANCE

See Figure 6.2-A.

To prevent stoppages and faults of the tool, regular maintenance (including inspections, checks and operations) must be scheduled 

to keep the following under systematic control:

 

• State of lubrication of the tool.

 

• State of wear of consumables.

P 3 

Shut off all sources of power to the tool.

The operator must wear and use suitable personal protections before starting to clean the tool.

Содержание RIV939P

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды