5/8
AtlasSound.com
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
BlueBridge BBWP-TOUCH7
7" Touch Panel DSP Wall Controller Installation Guide
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
©2013 Atlas Sound L
.P
. All rights reserved. Atlas Sound is a trademark of Atlas Sound L
.P
. All other trademarks are the property of their respective owners. All specs are subject to change without notice. P/N 4938
57 A
TS004748 RevA 10/13
10. Align the bezel over the TOUCH7 rear threaded bolts on the rear side as shown in Figure 14.
11. Insert and tighten the four lock washers and M3 nuts as shown in Figure 15.
12. Chose the method to power the TOUCH7
A. External 5V DC external power supply (included).
B. PoE network switch. Using a PoE switch is recommended as it will supply both power and network connectivity.
13. Choose the best location for the DC power cable and/or CAT5e cable to access the in-wall (flanged) back can. There are
1
⁄
2
" knock outs on each
side of the back can to facilitate wire feeding.
14.
Note:
Make sure the PoE or external power supply is disconnected on the opposite end of the cable assuring no DC power is present in the
cables.
15. Run the cables through the back can.
Figure 13
Figure 15
Figure 16
Figure 14
