9
Figure 14
Figure 15
OPERATING THE REMOTE
CONTROL
Install 12V MN21/A23 battery (included).
To prevent damage to transmitter, remove the
battery if not used for long periods. (Fig. 14)
Restore Power to Ceiling Fan.
A. H, M, L Buttons:
These buttons are used to set the fan speeds
as follows;
L: Low Speed
M: Medium Speed
H: High Speed
B. OFF Button:
This button turns the fan off.
C. ACCESSORY Button:
This button is used to turn on and off the light
kit and also controls the brightness setting.
Press and release this button to turn the light
on or off. Press and hold the button to set the
desired brightness. The light button has an
auto-resume, it will stay at the same
brightness as the last time it was turned off.
