Operation And Use
23
LR-06P
Operation And Use
Never operate the lift with any person or equipment below.
Never exceed the rate lifting capacity.
Always ensure that the lift safety is locked before any attempt
is made to work on or near the vehicle.
Do not permit the power unit to get wet!
8.1 Controls
Controls for operating the lift are:
LIFTING BUTTON (1)
When pressed, the motor is powered to
operate the hydraulic circuit to raise the lift.
LOWERING LEVER (2)
When pressed, the hydraulic fl uid is released
from the cylinder to the oil tank: the lift starts
to descend.
8.2 To Raise The Lift
• Be sure the roller assembly must be disengaged when lifting vehicle (see
Fig. 14)
• Drive the vehicle at the center of the lift. Check to make sure that the
vehicle is secured.
• Press the lifting button till the lift is raised to the required height and the
locks are in engaged position (see Fig.15), then press the lowering lever to
lower the lift to engage the mechanical safety.
Figure 13 - Controls
