Atlas Copco ZT-55, Инструкция

Страница: 38 / 90

Function
To call up information regarding the actually measured data and the status of some inputs such as the motor
overload protection. Consult the menu flow in section
Control programs.
Procedure
Starting from the Main screen (see Main screen menu ):
• Press the key “Menu” (F1).
• Press the arrow down key (1) until “Measured Data” is followed by a horizontal arrow.
• Activate the menu by pressing the tabulator key (2).
• By pressing the scroll keys (1), a number of actually measured data can be found.
• If one of the sensors is linked to a shut-down, service or warning function, both the actually measured
value as well as the corresponding shut-down, warning or service level can be called up by pressing key
(2).
3.11 Counters menu
Control panel
Function
To call up:
• The running hours
• The loaded hours
• The number of motor starts
• The number of hours the regulator (module) has been under tension
• The number of load cycles
Procedure
Starting from the Main screen (see Main screen menu ):
• Press the key “Menu” (F1).
• Press the arrow down key (1) until “Counters” is followed by a horizontal arrow.
• Press the tabulator key (2) to activate the menu.
• By pressing the arrow key (1), the above-mentioned data can be found.
Instruction book
36 APFS998935v00