Atlas Copco XRHS 1100 CD6, Инструкция по эксплуатации

Страница: 56 / 112

Instruction Manual
56 2954 2510 03
4 Maintenance
4.1 Liability
The manufacturer does not accept any liability for any damage arising from the use of non-original
parts and for modifications, additions or conversions made without the manufacturer’s approval in
writing.
4.2 Service paks
A Service Pak is a collection of parts to be used for a specific maintenance task, e.g. after 50, after
500 and after 1000 running hours.
It guarantees that all necessary parts are replaced at the same time keeping down time to a
minimum.
The order number of the Service Paks are listed in the Atlas Copco Parts List (ASL).
Use of service paks
Service Paks include all genuine parts needed for normal maintenance of both compressor and
engine.
Service Paks minimize downtime and keep your maintenance budget low.
Order Service Paks at your local Atlas Copco dealer.
4.3 Service kits
A service kit is a collection of parts to fit a specific repair or rebuilding task.
It guarantees that all necessary parts are replaced at the same time which improves the uptime of
the unit.
The order numbers of the Service Kits are listed in the Atlas Copco Parts List (ASL).
4.4 Storage
Run the compressor regularly, e.g. twice a week, until warm.
Load and unload the compressor a few times to operate the unloading and regulating components.
Close the air outlet valves after stopping.
Contact Atlas Copco.
If the compressor is going to be stored without running from time to time,
protective measures must be taken.