Atlas Copco XAHS 186 Cud PNE Скачать руководство пользователя страница 56

Страница: 56 / 70

- 56 -

Problem: Air and oil mist expelles from air filters immediately after stopping.

Problem: Compressor overheating.

Possible faults

Corrective actions

Check valve at element outlet.

Remove and inspect. Replace if necessary. Replace air filter elements and

safety cartridges. Check the oil level and add oil if necessary. Run the

compressor for a few minutes, stop and recheck oil level.

Plunger of oil stop valve jammed.

Remove and inspect. Replace if necessary. Replace air filter elements and

safety cartridges. Check the oil level and add oil if necessary. Run the

compressor for a few minutes, stop and recheck oil level.

Possible faults

Corrective actions

Insufficient compressor cooling.

Locate compressor away from walls; when banked with other compressors,

leave space between them.

Oil cooler clogged externally.

Clean oil cooler. Refer to section

Cleaning coolers

Oil cooler clogged internally.

Consult Atlas Copco.

Oil filters clogged.

Replace oil filters.

Oil level too low.

Check oil level. Top up with recommended oil if necessary.

Thermostatic by-pass valve remains stuck in opened

position.

Remove valve and check for proper opening and closing. Replace if out of

order.

Fan blade(s) broken.

Check and correct if necessary.

Oil stop valve malfunctioning.

Remove and inspect valve.

Oil separator element (OS) clogged.

Have element removed and inspected by an Atlas Copco Service

representative.

Содержание XAHS 186 Cud PNE







































































Результаты поиска

Содержание XAHS 186 Cud PNE

Отзывы:

Бренды по названию

Популярные бренды

Atlas Copco XAHS 186 Cud PNE, Инструкция по эксплуатации

Результаты поиска

Содержание XAHS 186 Cud PNE

Отзывы:

Бренды по названию

Популярные бренды