- 36 -
Notes
(continuation of page 35)
1. More frequently when operating in a
dusty environment.
2. Refer to engine operation manual.
3. After a days work.
4. Yearly is only valid when using
PARCOOL. Change coolant every 5
years.
5. Use Atlas Copco oil filters, with by-
pass valve as specified in the parts list.
6. Gummed or clogged filters means fuel
starvation and reduced engine
performance.
7. See section Oil specifications.
8. The following part numbers can be
ordered from Atlas Copco to check on
inhibitors and freezing points:
•
2913 0028 00 refractometer
•
2913 0029 00 pH meter
9. See section Safety valve.
10. Replace all rubber flexibles every 6
years.
For other specific engine and alternator
requirements refer to specific manuals.
Keep the bolts of the housing, the lifting
beam, tow bar and axles securely
tightened. For torque values see section
Technical specifications.
Maintenance schedule (km)
Daily
50 km
after initial
start-up
Every
500
km
Every
2000
km
Yearly
To determine the maintenance intervals, use mileage indication in km or calender time, whichever occurs
first.
Check towbar, handbrake lever, spring actuator,
reversing lever, linkage and all movable parts for
ease of movement
x
x
x
x
x
Check height of adjusting facility
x
x
Check coupling head
x
x
x
Check tyre pressure
x
x
x
x
Oil or grease brake lever and moving parts such as
bolts and joints
x
x
x
Grease coupling head, towbar bearings at the
housing of the overrun brake
x
x
x
Check torque of wheel nuts
x
x
x
Check brake system (if installed) and adjust if
necessary
x
x
x
Lubricate torsion bar axle trailing arm
x
x
Grease sliding points on height adjusting parts
x
x
Check tyres for uneven wear
x
x
Check safety cable for damage
x
x
Check hub cap for firm seating
x
x
Check Bowden cable on height adjustable
connection device for damage
x
x
Check/adjust lateral play of wheel bearing
(compact bearing)
x
Check brake lining wear
x
DD6.book Page 36 Monday, November 10, 2014 11:25 AM
