Atlas Copco XA 375 DD6 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 76

background image

- 21 -

AIR FLOW

The system comprises:

AF

Air filter

AR/OS

Air receiver/oil separator

CE

Compressor element

UA/UV Unloader assembly with unloader valve

BDV

Blow-down valve

LV

Loading valve

Air drawn through the airfilter (AFce) into the
compressor element (CE) is compressed. At the
element outlet, compressed air and oil pass into the air
receiver/oil separator (AR/OS).

The check valve (CV) prevents blow-back of
compressed air when the compressor is stopped. In
the air receiver/oil separator (AR/OS), most of the oil
is removed from the air/oil mixture; the remaining oil
is removed by the separator element.

The oil collects in the receiver and on the bottom of
the separator element.

The air leaves the receiver via a minimum pressure
valve (MPV) which prevents the receiver pressure
from dropping below the minimum working pressure
(specified in section Limitations), even when the air
outlet valves are open. This ensures adequate oil
injection and prevents oil consumption.

A temperature switch (TS) and a working pressure
gauge (WPG) are comprised in the system.

A blow-down valve (BDV) is fitted in the unloader
assembly to automatically depressurise the air
receiver (AR) when the compressor is stopped.

OIL SYSTEM

The system comprises:

AR/OS

Air receiver/oil separator

OC

Oil cooler

OF

Oil filter

The lower part of the air receiver (AR) serves as an oil
tank.

Air pressure forces the oil from the air receiver/oil
separator (AR/OS) through the oil cooler (OCce) and
oil filter (OF) to the compressor element (CE).

The compressor element has an oil gallery in the
bottom of its casing. The oil for rotor lubrication,
cooling and sealing is injected through holes in the
gallery.

Lubrication of the bearings is ensured by oil injected
into the bearing housings.

The injected oil, mixed with the compressed air,
leaves the compressor element and re-enters the air
receiver, where it is separated from the air as
described in section Air flow. The oil that collects on
the bottom of the oil separator element is returned to
the system through a scavenging line (SL), which is
provided with a flow restrictor (FR).

The oil filter by-pass valve opens when the pressure
drop over the filter is above normal because of a
clogged filter. The oil then by-passes the filter
without being filtered. For this reason, the oil filter
must be replaced at regular intervals (see section
P reventive maintenance schedule for the
compressor).

Reference

Name

PG

Pressure Gauge

RV

Regulating Valve

SC

Safety Cartridge (option)

SL

Scavenge Line

SR

Speed Regulator

SV

Safety Valve

TS

Temperature Switch

UA

Unloader Assembly

UV

Unloader Valve

VH

Vent Hole

VI

Vacuum Indicator

VV

Vacuator Valve

DD6.book Page 21 Monday, November 10, 2014 11:25 AM

«
...
19
20
21
22
23
...
»

Содержание XA 375 DD6













































































Отзывы:

Нет отзывов

Похожие инструкции для XA 375 DD6

Бренд: Fieldmann Страницы: 108

Бренд: OMEGA COMPRESSORS Страницы: 31

Бренд: Schulz Страницы: 2

Бренд: Husky Страницы: 39

Бренд: Würth Страницы: 268

Бренд: California Air Tools Страницы: 16

Бренд: Michelin Страницы: 48

Бренд: Ingersoll-Rand Страницы: 53

Бренд: Ingersoll-Rand Страницы: 24

Бренд: Ingersoll-Rand Страницы: 42

Бренд: Powerex Страницы: 20

Бренд: Rolls Страницы: 2

Бренд: Hertz Страницы: 32

Бренд: Atlas Copco Страницы: 53

Бренд: California Air Tools Страницы: 17

Бренд: GEA Страницы: 32

Бренд: Prematic Страницы: 96

Бренд: GEA Bock Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды