Atlas Copco QAS 150-200 Cud, Инструкция по эксплуатации

Страница: 15 / 82

- 15 -
Bodywork
The alternator, the engine, the cooling system, etc. are
enclosed in a sound-insulated bodywork that can be
opened by means of side doors (and service plates).
The lifting beam access to lift the generator by means
of crane is integrated in the bodywork and easily
accessible from outside.
The earthing rod, connected to the generator’s earth
terminal is located at the bottom of the frame from
outside.
Markings
A brief description of all markings provided on the
generator is given hereafter.
This symbol indicates the presence of
electric shock hazards. Enclosures
marked with these symbols should
only be opened by trained or instructed
people.
Indicates that the engine exhaust is a
hot and harmful gas, which is toxic in
case of inhalation. Always make sure
that the unit is operated outside or in a
well-ventilated room.
Indicates that these parts can become
very hot during operation (e.g. engine,
cooler, etc.). Always make sure that
these parts are cooled down before
touching them.
Indicates that the guiding rods may not
be used to lift the generator. Always
use the lifting rod in the roof of the
generator to lift it.
Indicates a lifting point of the
generator.
Indicates that the generator may be
refuelled with diesel fuel only.
Indicates the drain for the engine oil.
diesel
Indicates the drain for the coolant.
Indicates the drain plug for the engine
fuel.
Use PAROIL E only.
Indicates the different earthing
connections on the generator.
Indicates that the alternator should not
be cleaned with high pressurised
water.
Indicates the battery switch.
Indicates that the unit may
start automatically and that
the instruction book has to
be consulted prior to use.
Read the instruction manual
before using the lifting eye.
Indicates the 3-way valve.