Service
EN
LTV39-2 R56-HAD
14
© Atlas Copco Industrial Technique AB - 9839 2906 01
Brand
Angle gears
Atlas Copco
Atlas Gear Grease 270
Lubrication of Gears in Clutch Casing
Lubricate according to the Lubrication Guide.
Lubrication of motor parts
■
No grease is needed for protected Ball bearings.
■
Apply a thin layer of oil where needed.
Lubrication
■
Lubricate the gears, the valve and the clutch according to the Lubrication Guide at each service occa-
sion.
■
Lubricate o-rings and threaded connections with grease before assembling.
■
Lubricate the trigger, the needle bearings and the ball bearings with grease during the regular over-
haul of the tool.
For Maximum Performance
At tough working conditions – soft joints and max. setting – lubrication of the air is recommended.
With extreme dry air the service life of vanes and machine performance might be reduced. A daily supply
of 0.1 – 0.2 ml oil into the machine inlet will improve the machine performance. Alternatively consider an
automatic lubricator device, Atlas Copco oil fog lubricator DIM, or single point lubricator DOS, which will
improve the machine performance.
