manualshive.com logo in svg

Atlas Copco GA 55+, Инструкция

Поделиться
Скачать
Atlas Copco GA 55+ Скачать руководство пользователя страница 88

88

Instruction book

9096 3313 00

5       Energy recovery (optional)

5.1     Energy recovery unit

Description

A large part of the energy required for any compression process is transformed into heat. For GA oil-
injected screw compressors, the major part of the compression heat is dissipated through the oil system.
The Atlas Copco energy recovery (ER) systems are designed to recover most of the above-mentioned heat
by transforming it into warm or hot water without any adverse influence on the compressor performance.
The water can be used for diverse applications.

Components

The energy recovery system is completely integrated and mainly comprises:

•

Stainless steel oil/water heat exchanger

•

Selector handle (V1) to enable/disable Energy Recovery

•

Thermostatic by-pass valve for energy recovery heat exchanger(s) (BV2)

•

Two temperature sensors for water inlet and outlet control (3 and 4)

•

The necessary bolts, flexibles, etc.

Energy recovery unit (ER-unit)

Reference

 

Designation

 

1 

Water inlet pipe 

2 

Water outlet pipe 

3 

Temperature sensor, water inlet pipe 

 

Содержание GA 55+























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды