Atlas Copco Elektronikon II, Руководство пользователя

Страница: 9 / 36

User manual
2920 1456 03 9
4.1 Function of control programs
Program/Function Description
Main screen
Shows in short the operation status of the compressor. It is the gateway
to all functions. See Fig. 4.1.
Status data
Calling up the status of the compressor protection functions:
- shut-down
- shut-down warning
- service warning
-
warning
Resetting of a shut-down, motor overload and service condition.
Measured data
Calling up:
- actually measured data
- the status of a number of inputs, such as the fan motor overload
protection
Counters
Calling up the:
-
loaded hours
- number of motor starts
- regulator (module) hours
- accumulated volume
Test Allows a display test.
Modify Params
Modifying the parameters for:
- compr./motor settings (e.g. setpoints)
- parameters (e.g. minimum stop time)
- protections (e.g. air temperature shut-down level)
- service plans
- clock functions (automatic compressor start/stop/pressure band
commands)
-
configuration (time, date, display language, …)
Service Calling up service plans and resetting the timers.
Saved data Calling up the saved data: last shut-down, last emergency stop data
4.2 Main screen
When the voltage is switched on, the Main screen is shown automatically, showing in short the
operation status of the compressor.
Compressor out
bar 7.0
rpm 2500 ↓
Menu
F1 F2 F3
Fig. 4.2 Main screen, typical example
If the function keys or arrow keys are not used for some minutes, the display will automatically return
to the Main screen.
Whenever displayed on a submenu screen, press the key Main to return to the Main screen.