Atlas Copco DKR 36, Инструкция по безопасности и эксплуатации

Страница: 19 / 260

♦
Be sure that the straight spline on the piston (A)
engages the straight spline on the chuck sleeve
(B), and that the spiral spline on the piston (A)
engages the spiral spline of the ratchet ring (C).
♦ Assemble the ratchet ring (C) into the fronthead
(D), so that the flat surface marked T faces the
cylinder (E).
♦ Tighten the side bolts stepwise to the correct
torque. After tightening, rotate the chuck manually
to make sure that the rotation is free.
Storage
●
Clean the machine properly before storage, in
order to avoid hazardous substances. See “Dust
and fume hazard”
●
Pour approximately 1 ⁄
2
oz (5 cl) of oil directly into
the air inlet nipple, connect the machine to the
compressed air supply and start it for a few
seconds.
● Always store the machine in a dry place.
Disposal
A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in respect to local restrictions.
19 © 2010 Atlas Copco Construction Tools AB | No. 9800 0938 90 | 2010-04-01
Original instructions
Safety and operating instructions DKR 36, 36R