Atlas Copco 8432084561, Инструкция по эксплуатации продукта

Страница: 11 / 16

ETD MT41-100-I06 EN Operation
© Atlas Copco Industrial Technique AB - 9839 1064 01
11
Start options
The start mode of the tool can be configured as below:
■
Trigger start (default)
Press the start lever briefly.
■
Push start
Push the bit towards the screw and work piece.
■
Trigger and push start
Press the start lever and push the bit towards the screw and work piece.
For Trigger start and Push start , the tightening modes can be configured as below:
■
Hold (default)
The trigger must be pressed during the whole tightening process.
■
Pulse
The tool will fulfill tightening with just a start.
Function button
By default, the function button is configured with toggle reverse function to single push. That is, by pushing
the function button once, the reverse function is on.
The following user interaction types can be configured for function button:
■
single push
■
double-push
■
pressed
The following functions can be configured to each user interaction type:
Toggle reverse function Run the tool in CCW.
Single reverse function Run the tool in CCW once and shift back in CW when
tightening is ready.
Vacuum toggle Start and stop Vacuum. Auto off after complete tight-
ening.
Guiding light toggle Start and stop Guiding light. Auto off after complete
tightening.
Acknowledge for error codes Acknowledge error codes from the tool instead of from
the controller's monitor.
Integration with Digital I/O Choose other functions from Digital I/O.
Front light
By default, the front light is only configured to show a faulty tightening. That is, the light turns red when
there is a faulty tightening.
The intensity of the light and other functions can be configured in Tools Talk MT.
Status indicator
The front light can be configured to indicate status in Tools Talk MT:
Function Color option Default
Tightening OK Green Off
Tightening NOK Red On
Batch finished Green (default) or blue Off