Atlantis Webshare 341, Быстрый старт

Страница: 49 / 71

49
1.5 Factory Default Settings
Before you configure this WebShare 341, you need to know the following default
settings:
 Username: admin
 Password: atlantis
 IP address: 192.168.1.254
 Subnet Mask: 255.255.255.0
 DHCP Server: enable (from 192.168.1.100 to 192.168.1.199 )
 WAN= PPPoA Routing, VPI=8, VCI=35, VC-Mux
If you ever forget the password to log in, you may press
the RESET button up to 6 seconds to restore the factory
default settings.
The parameters of LAN and WAN ports are pre-set in the factory. The default
values are shown below.
LAN Interface
IP Address 192.168.1.254
Subnet Mask 255.255.255.0
DHCP Server Enabled
DHCP Server IP Pool From 192.168.1.100 to 192.168.1.100
WAN Interface
Encapsultation PPPoA
Multiplexing VC-Mux
Mode Routing
VPI/VCI 8/35