Atlantis onepower 701, Руководство пользователя

Страница: 30 / 53

30
Number Explanations
1 AC Inlet
2 Backup Outlets: 3pcs IEC320
3 Computer Interface: USB Type
4 RJ11/RJ45 Jacks: MODEM /LAN Protection
5 Surge Outlets: 1pcs IEC320
6 AC Fuse Holder. (W/fuse) (6.5A/250Vac or 8A/250Vac).
7 Sticker with details on the product.
1.10 Replacing the Battery
The Following Precautions Should be Observed When Working on Batteries:

Remove watches, rings, or other metal objects.

Use tools with insulated handles.

Wear rubber gloves and boots.

Do not lay tools or metal parts on top of batteries.

Disconnect charging source prior to connecting or disconnecting battery
terminals.
Before beginning the replacing of the battery You have to switch-off all the device
and detach AC cable from the wall receptacle.

Use a cross-type screwdriver to remove the two front panel screws and slide
down the panel.

Gently Pull the battery out of the UPS.

Loosen the black wire from the negative (-, STEP1) terminal and red wire
from the positive (+, STEP2) terminal.

Connect the battery leads to the new battery (small sparks at the battery
connectors are normal during connection).

Slide the battery into the UPS.

Close the front panel and fasten two screws.

Dispose of the old battery properly at an appropriate recycling facility.