Atlantis NetFly AP5 W300N, Быстрый старт

Страница: 25 / 34

25
 ON= The WLAN connection is in the
communication state.
 Blink= Data is being transmitted and received
in the WLAN.
PORT/Button MEANING
RJ45(LAN)
If NetFly is set to the AP mode (Router Mode), the interface is a WAN
interface which connects NetFly to WAN or uplink network devices.
If NetFly is set to the AP(Bridge)/Repeater/Client mode, the interface is
an LAN interface.
RESET
Press the Reset button gently for 3-6 seconds and then release it. The
system restores to the factory default settings.
AP/
Repeater/
Client
It is used for setting the NetFly to the AP,
Repeater, or Client mode.
 AP mode: including the Bridge and router modes
 Repeater mode: to expand wireless network coverage
 Client mode: equivalent to a wireless network adapter
WPS
For enabling WPS PBC mode. For more information, refer to WPS
descriptions for each mode.
1.5 Cabling
First you must connect the product to the RJ45 ports the PCs of your Lan or others Switch. In the
end connect the NetFly AP5 directly to the socket. Once you’ve done all the connections the
product will carry on immediately a autotest (120 seconds). With the power source on, once the
device is connected, the Power, LAN and WLAN port LEDs will light up indicating a normal status.
If the LAN Port’s Link indicator does not light up then check the RJ-45 cable if it is firmly feed to
the RJ45 port, while the LAN is link up to the Switch/Hub, the LAN port’s LED will light up.
The control LEDs of the device are clearly visible and the status of the network link can be seen
instantly.