Atlantis NetFly AP4 WN, Руководство пользователя

Страница: 46 / 90

46
 Band : Select the IEEE 802.11 mode from the drop-down list. For
example, if you are sure that the wireless network will be using only
IEEE 802.11g clients, then it is recommended to select
802.11g only
instead of 2.4 GHz B+G which will reduce the performance of the
wireless network. You may also select 802.11B+G+N. If all of the
wireless devices you want to connect with this router can connect in the
same transmission mode, you can improve performance slightly by
choosing the appropriate "Only" mode. If you have some devices that
use a different transmission mode, choose the appropriate "Mixed"
mode.
 Site Survey : Click on the Site Survey button to view a list of Access
Points in the area. The Site Survey page displays information about
devices within the 802.11b/g/n frequency. Information such as channel,
SSID, BSSID, encryption, authentication, signal strength, and operating
mode are displayed. Select the desired device and then click on the Add
to AP Profile button.

SSID : The SSID is a unique named shared amongst all the points of the
wireless network. The SSID must be identical on all points of the
wireless network and cannot exceed 32 characters.

Status: Displays the current status of the device.

Channel : The channels available are based on the country‟s regulation.
A wireless network uses specific channels in the wireless spectrum to
handle communication between clients. Some channels in your area may
have interference from other electronic devices.

Click on the Apply button to save the changes.