Atlantis NetFly AP4 WN, Руководство пользователя

Страница: 31 / 90

31
Wireless clients detect the beacons and awaken to receive the broadcast
and multicast messages. The default value is 1. Valid settings are
between 1 and 10.

Data Rate : You may select a data rate from the drop-down list,
however, it is recommended to select auto . This is also known as auto-
fallback.

N Data Rate : You may select a data rate for 802.11n from the drop-
down list, however, it is recommended to select auto . This is also
known as auto-fallback.

Channel Bandwidth : You may select a channel bandwidth in order to
improve the efficiency of the network, however, it is recommended to
select
Auto 20/40MHz . This is also known as auto-fallback.

Preamble Type : Select a short or long preamble. For optimum
performance it is recommended to also configure the client device as the
same preamble type.

CTS Protection : CTS (Clear to Send) can be always enabled, auto, or
disabled. By enabled CTS, the Access Point and clients will wait for a
„clear‟ signal before transmitting. It is recommended to select
auto .

Tx Power : You may control the transmit output power of the device by
selecting a value from the drop-down list. This feature can be helpful in
restricting the coverage area of the wireless network.

Click on the Apply button to save the changes.