Atlantis Hostpower 02 Series, Руководство пользователя

Страница: 25 / 63

ENG
25

Try the field working condition by running some application programs on your
computer and repeating step.

Check if the UPS is initiated properly to support continuous operation.
Plug the UPS into the wall outlet to charge the UPS for
over 6 hours before using the UPS.
1.8 Front Panel Explanations
On the front panel You can found a LCD Display for an easy diagnostic
LED Information
Main Switch To Control on/off the UPS when Utility is normal.
To enable “DC - Start” Function when Utility fails. (To enable
DC Start properly, you are recommended to connect <80%
output load with the UPS only). P.S. Make sure the computer
connected to the UPS is switched on before enable the "DC-
Start" function. You are not recommended to add some other
computer or peripherals after DC-Start function is activated.
1 Input voltage.
2 Output voltage.
3 AC mode indicator.