Atlantis A02-RA210-W54, Руководство пользователя

Страница: 31 / 67

WIRELESS ROUTER ADSL
25
• MRU: Maximum Receive Unit indicates the peer of PPP connection the maximum size
of the PPP information field this device can be received. The default value is 1492 and
is used in the beginning of the PPP negotiation. In the normal negotiation, the peer will
accept this MRU and will not send packet with information field larger than this value.
•
MTU: Maximum Transmission Unit indicates the network stack of any packet is larger
than this value will be fragmented before the transmission. During the PPP negotiation,
the peer of the PPP connection will indicate its MRU and will be accepted. The actual
MTU of the PPP connection will be set to the smaller one of MTU and the peer’s MRU.
The default value is 1492.
•
MSS: Maximum Segment Size is the largest size of data that TCP will send in a single
IP packet. When a connection is established between LAN client and a host in the
WAN side, the LAN client and the WAN host will indicate their MSS during the TCP
connection handshake. The default value is 1492.
•
Authentication: Default is Chap (Auto). Your ISP will advise you whether to use Chap
or Pap
•
Automatic Reconnect: Check to enable this device to automatically re-establish the
PPPoE session when disconnected by ISP.
Press Submit and then click on Save Config.
Press again Submit . to reboot the Router.