Wireless Broadband Router
A02-RB-W54 Pag. 45
3.7.1.3 IP Filter
The IP filter function enables you to define a minimum and maximum IP address
range filter; all IP addresses falling within the range are not allowed Internet
access. The IP filter profiles are listed in the table at the bottom of the page.
(Note: Click anywhere in the item. Once the line is selected, the fields
automatically load the item's parameters, which you can edit.)
Enable:
Click to enable or disable the IP address filter function.
Range Start:
Type the minimum address for the IP range. IP addresses falling
between this value and the Range End are not allowed to access the Internet.
Range End:
Type the minimum address for the IP range. IP addresses falling
between this value and the Range Start are not allowed to access the Internet.
Add:
Click to add the IP range to the table at the bottom of the screen.
Update:
Click to update information for the range if you have selected a list item
and have made changes.
Delete:
Select a list item and click Delete to remove the item from the list.
Clear:
Click to erase all fields and enter new information.
Click
Apply
to save.
