Atlantic WOYG112LHT, Инструкции по установке и вводу в эксплуатацию

Страница: 32 / 92

"
General
The connection must comply with good trade practice
according to local building regulations.
Reminder: Seal everything when fitting in accordance
with prevailing trade practice for plumbing work:
- Use suitable seals (fibre seals, o-rings).
- Use Teflon tape or hemp.
- Use sealing paste (synthetic depending on the case).
Use glycol if the flow temperature set [908-909
Settings] <10 ° C. If you are using a glycol/water mix,
provide for an annual check on the quantity of glycol.
Use monopropylene glycol only. The recommended
concentration is 30% minimum. Never use
monoethylene glycol .
"
In certain installations, the presence of different
metals can cause corrosion problems; the
formation of metal particles and sludge in the
hydraulic circuit is then seen .
"
In this case, it is advisable to use a corrosion
inhibitor in the proportions indicated by its
manufacturer .
- Please refer to the chapter "Treatment of domestic
and heating water" in our price catalogue.
"
It is also necessary to ensure that the treated
water does not become aggressive.
4 Hydraulic connecting and gas connecting
figure 30 - Connections
1
2
3
5
4
6
7
8
9
10
11
1 "Liquid" refrigerating connection.
2. "Gas" refrigerating connection.
3 Heating return (1 circuit).
4 Heating outlet (1 circuit).
5 Stop valve (not provided).
6 DHW outlet (domestic hot water).
7 DCW inlet (domestic cold water).
8 Disconnector (not supplied).
9 Filling
10. Safety device (required / not supplied).
11 Connections to drain with siphon.
- D rain evacuation.
- S afety valve evacuation.
- C ondensate evacuation (acid condensate resistant pipe).
Installation and commissioning instructions "1485 - EN"
Heat pump alféa hybrid duo gas
- 32 -