Atlantic VELMA, Руководство пользователя

Страница: 3 / 30

Volume
3
INSTALLING THE DEVICE
1) Where to install.
- This device was designed to be installed in residential premises.
In any other case, please contact your supplier.
- Installation must comply with the standards currently enforced in the
country of use.
- Install the device within minimum distances from obstacles
Do not install the device in a draft likely to affect its control (i.e. air
conditioner, etc…).
Do no install under a fixed socket.
Do not install shelves above the device.
This device should be installed so that the lowest heated rail is at
least 600 mm above the floor, in order to prevent injuries to very small
children.
2) How to connect
-
The installation must comply with local national regulation.
- If the power cable is damaged or too short, it must be replaced by a
qualified electrician;
Volume
2
Volume
1
Volume 1 No electrical device
Volume 2 Electrical device IPX4
(Standard EN 60335-2-43:
2003/A2: 2008)
The device must be supplied with 230V, 50 Hz.
-