Atlantic VELMA, Руководство пользователя

Страница: 10 / 30

GB
10
At the end of the 30 minutes or with an increase of the temperature in
the room, the thermostat will start operating again.
- Enter in ″Stand-by″ mode.
- Press [+] for 3 seconds.
- Press
[+]
to activate / deactivate this function
- Press [Prog] to confirm and return to ″Stand-by″ mode.
When this function is activated, the ″Open Window″ icon is fixed on the
display.
When the device detects that the window is potentially opened, the
icon starts blinking.
When the function is deactivated the icon is not shown on the display.
Note:
In some case the device could fail to detect an open window
(i.e. if the thermostat is placed in an isolated area of the room far from
drafts, if it is placed close to a heating source or if the temperature
variation in the room is too slow).
When the symbol ″ ″ is on, the heating element is active.
5) ″RESET THE DEVICE″
To reset the device, it is necessary to unplug it for at least 2 hours.