Atlantic Ingenio VM 050 D400-3-E, Инструкция по эксплуатации

Страница: 8 / 69

8
COMMISSIONING AND OPERATION
ATTENTION! NEVER SWITCH THE WATER HEATER ON WITHOUT FILLING WITH WATER : For models fitted with an electrical resistance, this
would automatically be deteriorated.
-
The secondary circuit must be filled. Before switching on, open the hot water taps and bleed the pipes until there is no air inside.
-
Check the pipes and door seal under the cover are airtight. In the event of a leak, tighten moderately. Check that the hydraulic safety and
drainage devices are in good working order.
-
Switch the unit on.
-
After between 15 and 30 minutes, depending on the capacity of the unit, the water should flow drop by drop from the drainage outlet.
This normal phenomenon is the result of the water expanding. Check the pipes and seal are airtight. When the water is heating, and depending
on the quality of the water, reinforced water heaters may emit a bubbling sound; this noise is normal and does not mean that the unit is in any
way damaged. The thermostat is set to 65°C as standard.
-
IMPORTANT: If a constant emission of steam or boiling water is observed via the drainage valve or by the opening of a tap, cut the electric
power supply to the water heater and contact a professional.
The unit is fitted with a digital display which enables you to select the operating mode. (see diagram 4 page 4).
4. Operating modes
1/ MODE button (A): Enables you to select the operating mode. Short press to change mode.
2/
Setpoint buttons (B): For the modes concerned, these buttons allow the temperature setpoint to be increased or decreased (by steps of 1°C)
+ -
3/ Operating modes (C) Indicates the current operating mode of the unit
mode : The product constantly monitors and learns the hot water consumption habits and, after a minimum learning period of one week,
it automatically adjusts the hot water production according to past consumption recorded. A minimum hot water availability is guaranteed
according to the level of comfort selected.
Manual mode : the product maintains all the water at a temperature according to the level selected.
Holiday mode : keeps the water temperature at a minimum level, preventing the water from freezing
4/ Key lock (D): To lock and unlock the keypad, press the MODE and DOWN buttons simultaneously
-
mode:
By default in this mode, the level indications show an estimated volume of hot water available in the tank. This
estimated level is monitored and updated in real time
This mode offers the option of selecting different energy-
saving and comfort levels. The level of comfort is selected using the “+” or “ - ” button, and
offers 5 different levels
-
Manual mode :
In manual mode, the water heater regulates the water temperature at a stable temperature. The
temperature level is
selected using the from 5 different levels.
EN