29
PROGRAMMING THE HEATING PERIOD
:
HOW TO USE
P
ROG MODE
PROG
You can program your Comfort
and
temperature times either by using one of the three prestored programs, or
by connecting the pilot wire to a programming control (
Pilot wire (FP) mode is the default setting - refer to your programming
control’s manual
).
You can connect several devices to one programmer.
3 programs have been prestored:
,
and
and they cannot be changed.
0h
1h
2h
3h
4h
5h
6h
7h
8h
9h 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 20h 21h 22h 23h
NB :
If no command is received on the pilot wire, the device will function in Comfort mode.
When switching from Comfort to Eco mode, the new mode is active after about 12 seconds.
The Frost Protection and Load shedding commands have priority over the Eco, Comfort and programming (P1, P2, P3 and
) modes.
is recommended for when you are constantly at home, at the weekend for example (Eco mode from 23h to 5h,
Comfort mode from 5h to 23h).
is recommended if you are absent during the day (Eco mode from 23h to 5h and from 9h to 17h, Comfort mode
from 5h to 9h and from 17h to 23h).
is recommended if you are absent during the day, but you come back home at lunchtime (Eco mode from 23h to
5h, from 9h to 12h and from 14h to 17h, Comfort mode from 5h to 9h, from 12h to 14h and from 17h to 23h).
means that a programming control is used.
D
ESCRIPTION
GB
