background image

3

Plumbing Decorative Features

Using the Eco-Rise Diverter or Eco-Rise Plumbing Kit (Model: 

ERKIT3)

The Eco-Rise Plumbing Kit includes 25' of 1" Sch40 Flex Pipe and three 11/2" MPT x 1" socket 
bushings to connect to Hammered Brass Bowls and Aura Vases, but can be adapted to any 
style decorative element.

Set the decorative pieces in their approximate locations, layout the pipe to determine pipe 
lengths and cut accordingly. Connect pipe to the outlets of the Diverter using standard PVC 
solvent cement. 

For Hammered Brass Bowls, Aura Vases, Copper Spillway Bowls or any feature 

with 11/2" FIPT inlet.

 Install the 11/2" MPT x 1" socket bushings into the 11/2" inlet on the 

decorative feature. Glue the 1" pipe into the bushing and set the decorative element on the 
Eco-Rise. Repeat for any additional elements. 

For any decorative elements that accept 1" Flexible PVC

, glue a 1" Sch40 90° 

elbow (not included) onto the 1" pipe and glue a short length of 1" Sch40 PVC Flex Pipe into 
the other end of the elbow. Insert the short length of pipe into the bottom of the decorative 
element and set on the Eco-Rise. 

PV7500

TT1500

B

TT2000

B

TT3000

B

TT4000

B

Plumbing The Pump Vault

The PV7500 comes pre-drilled for use with 
the Eco-Rise Diverter for multiple features or 
11/2” pipe for a single larger feature. If multiple 
pumps are needed, the other side will need to 
be drilled. Bore a 2” diameter hole using the 
molded drill point as a guide.

Eco-Rise Diverters mount in the molded 
pockets on the neck of the PV7500 Pump 
Vault. Either one or two may be used, but each 
should be plumbed to its own pump. Insert 
the Diverter into the hole in the pocket and 
secure with the supplied hardware. 

Next install the pump and Triton Check Valve, 
following the instructions included with the 
Check Valve. Cut the Check Valve discharge 
pipe at Perfect Cut Line B for TT1500, TT2000, 
TT3000 and TT4000. Determine whether 
you need the 2” outlet fitting for the Eco-Rise 
Diverter or the 11/2” fitting for 11/2” pipe. Set the 
finished assembly in the Vault and attach to 
either Diverter or pipe.

The AF1000 Automatic Fill Valve is optional 
but strongly recommended to keep the water 
level in the reservoir safely above the pump, 
avoiding pump burnout. Mounting locations 
are provided on either side of the PV7500. 
Follow the Auto Fill instructions to install.

TR215CV Perfect Cut Chart

Отзывы: