3 .7
Active functions
The "
Active Functions
" page tells you which services are operating and allows you to change their status
-"
Indoor comfort
":
Heating / Cooling / Stop.
-
"Zone 1" / "Zone 2" / "Hot water"
:
ON / Stop.
"
If "Indoor Comfort" is set to "Stop", Zones 1 and 2 cannot be modified.
Active functions
Zone 1
ON
Indoor comfort
Heating
ON
Zone 2
ON
Hot water
3 .8
Temperature setting
The "Temperature setting" page
allows you to set temperature setpoints for Comfort and ECO periods (heating and
cooling) Settings must be recorded for each zone
"
Heating temperatures factory settings:
Comfort 20°C, ECO 19°C .
"
Cooling temperatures factory settings:
Comfort 24°C, ECO 26°C .
Temperature setting
Zone 1
Heating
Comfort T°
21 5°C
21 5°C
ECO T°
Cooling
Comfort T°
19 5°C
21 5°C
ECO T°
Some settings (or menus) might not be displayed. They are dependent on the installation's configuration (and installed options).
Operating manual "1819- EN"
- 13 -
Alféa Extensa / Excellia A I and Alféa Extensa / Excellia Duo A I heat pumps