Initial Setup
7/18
Before attempting to use any buttons on the front plate, ensure that the power
switch on the back of your STA-200 is flipped to the "On" position.
Next, hold
the Gear button for two seconds to power on the unit.
Once the power LED is
illuminated, click the Gear button to cycle through
the
modes.
Works as an ordinary BT
speaker. Use the Bluetooth
button to pair with your phone.
It’s a fully-functional SKAA receiver.
Feed it audio with any SKAA
hardware transmitter or any other
STA-200 in Relay mode.
Plug in any 3.5 mm stereo audio source into
the AUX jack on the front or any RCA line level
source into the Line In input on the back.
Same as AUX, but this mode
rebroadcasts th
e
AUX audio to
up to 4 more speakers via SKAA!
Same as BT, but this mode
rebroadcasts th
e
BT audio to up
to 4 more speakers via SKAA!
