Initial Setup
7/1
8
Before attempting to use any buttons on the
control
plate, ensure that the
power switch on the back of your
FS
-2
52
is flipped to the "On" position. Next,
hold the Gear button for two seconds to power on the unit. Once the power
LED is illuminated, click the Gear button to cycle through modes.
Works as an ordinary BT
speaker. Use the Bluetooth
button to pair with your phone.
Same as BT, but this mode
rebroadcasts that BT audio to up
to 4 more speakers via SKAA!
It’s a fully-functional SKAA
receiver. Feed it audio with any
SKAA hardware transmitter, or
any other
FS
-2
52
in Relay
mode.
Plug in any 3.5 mm stereo
audio source into the AUX jack,
or any RCA line level source into
the Line In input on the back.
Same as AUX, but this mode
rebroadcasts that AUX audio to
up to 4 more speakers via SKAA!
