Using the Line
in
Analog Audio Input
12/1
8
Audio Source
Connect your line level input to the input labeled "Line in" on the back
of your
FS
-2
52
.
Click the Gear button to cycle to AUX mode. When in AUX mode, the
yellow LED above AUX will illuminate.
Make sure no cables are plugged
into the
AUX in
jack located on the
back
of the
FS
-2
52
.
A plug in the
AUX in jack will block any
audio
signal from the Line in input on
the back.
Using the AUX Audio Input
Click the Gear button to cycle to AUX mode. When in AUX mode, the
yellow LED above AUX will illuminate.
Plug your audio device into the AUX jack located on the
back
of
the
FS
-2
52
.
